Chapter 3 Removal and Replacement Procedures (RRPs)
Replacement 22 KIT DRIVE ASSY MAIN (PL7.1.98)
1) Attach the DRIVE ASSY MAIN to the
printer.
Note: Since two types of screws are used for securing the DRIVE ASSY MAIN, ensure that the
right screws are used at their right securing positions.
The securing positions for tap screws are marked with [T].
The securing positions for metal screws are marked with [M].
2) Secure the DRIVE ASSY MAIN to the
printer with the one screw (silver, M4,
6mm) and the five screws (silver, tap,
8mm).
3 - 192