Chapter 3 Removal and Replacement Procedures (RRPs)
Note: When carrying out the work
described next procedure, take care not
to drop the coupling gear to inside.
3) Attach the DRIVE ASSY PH to the
printer.
Note: Since three types of screws are used for securing the DRIVE ASSY PH, ensure that the
right screws are used at their right securing positions.
The securing positions for tap screws are marked with [T].
The securing positions for metal screws are marked with [M].
4) Secure the DRIVE ASSY PH to the
printer with the one screw (silver, M4,
6mm), the one screw (silver, M3, 6mm)
and the one screw (silver, tap, 8mm).
3 - 196