1.3.7 Cleaning (TRANSFER BELT)
In the "Cleaning (TRANSFER BELT)" process, the transfer belt is cleaned by removing the excess
toner on its surface (for the density measurement of ADC toner patch).
-
Collecting excess toner from the transfer belt
(1) Toner on the TRANSFER BELT is scraped off by the Cleaner Blade that is in contact with the
Drum.
(2) The removed toner is dropped into the Cleaner BOX.
Blade Assy
TRANSFER BELT
Cleaner BOX
Belt
6 – 15
Chapter 6 Principles of Operation
Rio06115KA