Flows 96 Skew - Dell 2130cn Service Manual

Flows 96 Skew

Checking paper
Check that new dry recommended
paper which matches printer
specifications is being used and replace
as necessary.
Are images still skewed during printing?
Checking the front cover latch and PHD
ASSY after installation
After opening and closing the front
cover, reinstall the PHD ASSY.
Are images still skewed during printing
after installation?
Checking the paper feeding tray
Is the skewed paper fed from the SSF?
Use the Tray Feeder .
Mnt01116KA
Yes
Yes
Yes
Tray is recommended for paper feeding because sheets
fed via SSF is prone to skew depending on how the sheet
is placed of SSF.
No
END
No
END
No
Tray 1 and paper check
Remove CASSETTE ASSY 250 from
the printer and reinsert the paper.
Check that the side and end guides are
adjusted correctly in the CASSETTE
ASSY 250. If incorrect, readjust as
necessary.
Insert the CASSETTE ASSY 250 into
the printer.
Are images still skewed during printing?
Yes
Checking for foreign objects in the
paper transfer path and check the
SEPARATOR ROLLER ASSEMBLY
Remove any foreign objects in the
paper transfer path.
Reset the SEPARATOR ROLLER
ASSEMBLY.
Are images still skewed during printing?
Yes
Replace the HOLDER ASSY
SEPARATOR.
(Refer to Removal 2/ Replacement 52)
1 - 152
Chapter 1 Troubleshooting
No
END
No
END