Fip-1. 15 010-351 Restart Printer - Dell 2130cn Service Manual

FIP-1. 15 010-351 Restart Printer

Step
Possible causative parts:
FUSER ASSY (PL6.1.1)
PWBA MCU (PL8.2.13)
Checking the life counter value of the FUSER ASSY
1
Does the life counter value show the near of the end?
Checking after reseating the FUSER ASSY
Reseat the FUSER ASSY.
Warning: Start the operation after the FUSER ASSY has
2
cooled down.
Does the error still occur when the power is turned OFF and
ON?
Checking after replacing the FUSER ASSY
Replace the FUSER ASSY. (Refer to Removal 5/
Replacement 49.)
Warning: Start the operation after the FUSER ASSY has
3 cooled down.
Does the error still occur when the power is turned OFF and
ON?
NOTE: After replacement, be sure to clear the life
counter value.
Check
1 - 194
Chapter 1 Troubleshooting
Remedy
Yes
Replace the
FUSER ASSY.
(Refer to Removal
5/ Replacement
Go to step 2.
49.) After
replacement , be
sure to clear the
life counter value.
Go to step 3. End of work.
Replace the
PWBA MCU.
(Refer to Removal End of work.
43/ Replacement
11.)
No