Dell 2130cn Service Manual page 517

Hide thumbs Also See for 2130cn:

Table of Contents

Chapter 3 Removal and Replacement Procedures (RRPs)

Removal 31 KIT DRIVE ASSY PH (PL7.1.99)

1) Remove the Tray 1. (Removal 1)

2) Open the COVER ASSY FRONT (PL1.2.1).

Note: Cover the drum of the PHD unit to avoid exposure to light.

3) Remove the PHD Unit. (Removal 4)

Note: The FUSER part is very hot. Take added care not to get burned when performing the

service operation.

4) Remove the KIT FUSER ASSY. (Removal 5)

5) Remove the COVER ASSY TOP. (Removal 10)

6) Remove the COVER ASSY WINDOW TNR. (Removal 8)

7) Remove the COVER SIDE R. (Removal 13)

8) Remove the COVER SIDE L. (Removal 17)

9) Remove the COVER REAR. (Removal 29)

10) Remove the CLUTCH ASSY DRV and BEARING REGI. (Removal 30)

Accesses Position (All the numbers show the procedure number.)

11) Disengage the two connectors (P/J24,

26) on the PWBA MCU (PL8.2.13), release

the harness from the GUIDE HARNESS

AC (PL8.2.6).

Chapters

Table of Contents