Fip-1. 4 004-310 Restart Printer - Dell 2130cn Service Manual

FIP-1. 4 004-310 Restart Printer

Step
Possible causative parts:
HARN ASSY OPTION (PL3.1.20)
PWBA MCU (PL8.2.13)
250 OPTION FEEDER (PL12.1.1)
PWBA FEED H (PL12.2.1)
HARN ASSY TRAY (PL12.3.23)
Checking the Optional Feeder for installation
1
Is the Optional Feeder installed correctly?
2 Does the error still occur when the power is turned ON?
Checking the connectors for connection
Check the connections between the PWBA FEED H and
3
PWBA MCU.
Are P/J27, P/J273, and P/J419 connected surely?
4 Does the error still occur when the power is turned ON?
Checking the HARN ASSY TRAY for continuity
Disconnect P/J419 from the PWBA FEED H.
5
Disconnect P/J273 from the HARN ASSY OPTION.
Is each cable of P/J419 <=> P/J273 continuous?
Checking the HARN ASSY OPTION for continuity
Disconnect P/J27 from the PWBA MCU.
6
Disconnect P/J273 from the HARN ASSY TRAY.
Is each cable of P/J27 <=> P/J273 continuous?
Checking after replacing the PWBA FEED H
Replace the PWBA FEED H. (Refer to Removal 43/
7
Replacement 11.)
Does the error still occur when the power is turned ON?
Checking after replacing the 250 OPTION FEEDER
Replace the 250 OPTION FEEDER. (Refer to Removal 58/
8
Replacement 58.)
Does the error still occur when the power is turned ON?
Check
1 - 173
Chapter 1 Troubleshooting
Remedy
Yes
Reseat the
Go to step 3. Optional Feeder,
then go to step 2.
Go to step 3. End of work.
Reconnect the
connector(s)
P/J27, P/J273
Go to step 5.
and/or P/J419
surely,
then go to step 4.
Go to step 5. End of work.
Replace the
Go to step 6. HARN ASSY
TRAY.
Replace the
Go to step 7. HARN ASSY
OPTION.
Go to step 8. End of work.
Replace the
PWBA MCU.
(Refer to Removal End of work.
43/ Replacement
11.)
No