Fip-1. 57 Paper Jam - Dell 2130cn Service Manual

FIP-1. 57 Paper Jam 077-907

Step
Possible causative parts:
HARN ASSY DUP RELAY (PL1.2.13)
HARN ASSY L SIDE (PL3.1.18)
HARN ASSY OPTION (PL3.1.20)
ROLL ASSY REGI (PL3.2.9)
ROLLREGI METAL (PL3.2.10/Regi Sensor (PL3.2.13)
FUSER ASSY (PL6.1.1)
PWBA MCU (PL8.2.13)
FEEDER ASSY DUP (PL11.1.1)
Checking the COVER ASSY FRONT for latching
Open and close the COVER ASSY FRONT, then check the
1
latching.
Does the error still occur when printing?
Checking after reseating the FUSER ASSY
Reseat the FUSER ASSY.
2 Warning: Start the operation after the FUSER ASSY has
cooled down.
Does the error still occur when printing?
Checking after reseating the Duplex
3 Reseat the Duplex.
Does the error still occur when printing?
Checking the DRIVE ASSY EXIT for operation
Does the DRIVE ASSY EXIT operate properly?
Checked by [Digital Output]-[DO-D] on [IOT Diag] of
4
diagnosis.
During this check, cheat the interlock switch (HARN ASSY
INTERLOCK).
Checking the DRIVE ASSY DUP for operation
Does the DRIVE ASSY DUP operate properly?
Checked by [Digital Output]-[DO-12] on [IOT Diag] of
5
diagnosis.
During this check, cheat the interlock switch (HARN ASSY
INTERLOCK).
Checking the Duplex Clutch for operation
Does the Duplex Clutch operate properly?
Checked by [Digital Output]-[DO-35] on [IOT Diag] of
6
diagnosis.
During this check, cheat the interlock switch (HARN ASSY
INTERLOCK).
Checking the SENSOR PHOTO (REGI SENSOR) for
operation
Does the number on the screen increase by one, every time
7 the actuator of the SENSOR PHOTO (REGI SENSOR) is
operated?
Checked by [Digital Input]-[DI-2] in [IOT Diagnosis] of
diagnosis.
Check
1 - 266
Chapter 1 Troubleshooting
Remedy
Yes
Go to step 2. End of work.
Go to step 3. End of work.
Go to step 4. End of work.
Replace FEEDER
Go to step 5.
ASSY DUP.
Replace FEEDER
Go to step 6.
ASSY DUP.
Replace FEEDER
Go to step 7.
ASSY DUP.
Go to step 8. Go to step 11.
No