Chapter 3 Removal and Replacement Procedures (RRPs)
Replacement 15 HOLDER ASSY TCRU (K), (C), (M), (Y) (PL5.1.17~20)
Note: Described below is the replacement procedure common among the four HOLDER ASSY
TCRU.
1) Mate the lower boss of the HOLDER
ASSY TCRU with the hole of the FRAME
DISP.
2) Bend the HOLDER ASSY TCRU, mate
the upper boss of the HOLDER ASSY
TCRU with the hole of the FRAME DISP.
3) Press the central part of the HOLDER
ASSY TCRU, mate the hole of the
HOLDER ASSY TCRU with the boss of the
FRAME DISP.
Go to the next replacement step:
Replacement 25 COVER REAR (PL1.1.3)
3 - 178