Copying A File - Agilent Technologies NFA Series Quick Reference Manual

Step 6. Press
Step 1. To access the Copy menu press
Step 2. Put a formatted floppy in the A: drive.
Step 3. Select the type of file you want to rename (ENR tables, states, traces,
Step 4. Select the drive where your file is located, by pressing
Step 5. Select the file you wish to copy by highlighting the filename using the
Step 6. Press
NOTE
Step 7. Copy the file by pressing
and your file is now renamed and visible within the directory
Enter
displayed on your Noise Figure Analyzer.

Copying a File

This allows you to copy a file to a different location on both the [-C-]
and [-A-] drive.
limits, frequency lists or screens.
For example, if you are copying a State file, press
the From:Path: field. Select the drive, using the RPG or arrow keys to
highlight [-C-] or [-A-], then press
front-panel knob or arrow keys.
→to move to the To:Path: field and select the drive where you
Tab
want to copy the file using the RPG or arrow keys then press
If the correct drive is not listed in the Path: field, highlight ".." at the
top of the directory list. This enables you to move up a directory. Press
, to highlight the desired drive, ([-A-] or [-C-]) then press
Select
again.
Chapter 1
Performing Common File Operations
,
File File Manager
.
Select
.
Enter
Getting Started
, .
Copy
.
State
→ to highlight
Tab
.
Select
Select
17