Copying Configuration From Instrument Store To Disk - Agilent Technologies OmniBER 718 SDH User Manual

Using Instrument and Disk Storage

Copying Configuration from Instrument Store to Disk

Copying Configuration from Instrument Store
to Disk
Description If you have a configuration stored in the instrument store that you wish to use on
another instrument, you can copy it to disk. The configuration can then be
downloaded from the disk in to another OmniBER 718 with the same options as the
original instrument.
1 Choose the directory to receive the configuration file. See "Accessing
HOW TO:
Directories and Files " page 284.
2 Choose DISK OPERATION
Instrument Store number using
press
The Stored Settings description appears alongside the store number.
If required the description can be modified using
The description can contain up to 24 alphanumeric characters.
3 Enter the chosen filename using
press
The file name can contain up to 8 alphanumeric characters.
The filename extension is fixed as .CNF.
298
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
and use the pop-up keypad.
SET
PREVIOUS CHAR
SET twice and use the pop-up keypad.
FILE COPY CONFIGURATION
and
DECREASE DIGIT INCREASE DIGIT
JUMP NEXT CHAR
or press and use the pop-up keypad.
SET
PREVIOUS CHAR NEXT CHAR
and enter the
or
or