Copying A File - Agilent Technologies 4155C User Manual

File Operations

Copying a File

Copying a File
1. Press System key.
2. Select FILER softkey to display the SYSTEM: FILER screen.
3. Specify the mass storage device.
4. Select COPY softkey to display the COPY setup fields.
FUNCTION:COPY
SOURCE NAME
TARGET NAME
5. In the SOURCE NAME field, do one of the following:
• To copy from a diskette or a network file system:
a. Select FILE CATALOG softkey.
b. Move the pointer to the desired file name using the rotary knob.
c. Press SELECT SOURCE softkey. This sets the SOURCE NAME and
TYPE entries.
• To copy from internal memory, select MEM1, MEM2, MEM3 or MEM4
softkey.
6. To copy a file from one diskette to another diskette:
a. Move the pointer to the TARGET DISK field.
b. Select OTHER softkey. (SAME softkey will copy the file back onto the
source diskette.)
4-18
TYPE
Agilent 4155C/4156C User's Guide Vol.1, Edition 11
TARGET DISK