Table of Contents
Advertisement
Installation
Connecting the Accessories
Connecting the BNC Cable (Option 1E5)
When the E5070A/E5071A is equipped with Option 1E5 (high-stability frequency
standard), connect the BNC cable from the Ref Oven terminal to the Ref In terminal on the
rear panel as shown in Figure 2-6. The BNC cable is included in Option 1E5. When Option
1E5 is installed, the frequency accuracy and stability of the E5070A/E5071A will further
improve.
Figure 2-6
Connecting the BNC cable
Chapter 2
25
Advertisement
Table of Contents
