Model Building
Remove Button: this option allows you to remove the color definition for a particular zone type.
●
Show/Hide All Zones
You can choose to view or hide all the zones in the drawing. To toggle the zones from the menu
directly, select Format Building > Zone > Show/Hide All Zones.
NOTE
By default, Summit WMScanner saves the last saved option. If the zones are visible when the file is closed, the
zones are visible when you open the file next time.
Editing Partitions and RF Obstructions
The Format Building menu discussed in
for creating a drawing that Summit WMScanner can use for system performance. This section provides
more details about the following commands on the Format Building menu that affect Partitions.
Format CAD Drawing
●
Draw Partition
●
Change Partition
●
Current Partition Categories
●
Edit Partition Library
●
Scale Drawing.
●
Format CAD Drawing
The Format Building > Format CAD Drawing dialog box can be used to process an AutoCAD file (single
floor) for use by Summit WMScanner's predictive engine without using the Building Floor Manager. If
you wish to assemble a floor with other floors (stack the floors), then it will be necessary to use the
Building Floor Manager to perform the assembly.
192
"Format Building Menu" on page
165, contains menu commands
Summit WMScanner Users Guide