Creating A Customer Profile - Extreme Networks Ridgeline Guide Manual

3 If you select Properties from the pop-up menu, the Properties window for the Ethernet service is
displayed, which provides a list of settings you can modify.
Figure 54: Ethernet Service Properties Window
4 Click the setting you want to modify to bring up the provisioning box for that setting. For example,
Figure 55 shows the provisioning box for the Ethernet service name and description.
Figure 55: Provisioning Window for Ethernet Service Name and Description
5 Make any necessary changes to the settings, then click the Save button to validate and deploy the
changes.

Creating a Customer Profile

When configuring an Ethernet service in Ridgeline, you can associate the service with a specific
customer profile. The name of the customer associated with an Ethernet service appears in Network
Views tables and in the Services view.
To create a customer profile and associate it with an Ethernet service, do the following:
1 Open the Customer Profile configuration window. You can do this when creating the service by
selecting New Customer from the Customer list in the Ethernet service provisioning window.
You can also right-click an existing service in a Network Views table, and select Edit customer from
the pop-up menu, or open the Properties page for a service and click the Edit customer button, or
select Customer Name from the Tools menu.
Ridgeline Concepts and Solutions Guide
6
95