Supplying Starter - Canon 1000 Service Manual

D. Supplying Starter
Step
1 Return to the 1st screen ('FUNC' >
'INSTALL' in service mode).
Press SPLY-Y
DISP COUNTER
ADJUST
FUNC
OPTION
TEST
2 Using the funnel attached to the starter
bottle, supply the starter through the
toner supply mouth of the Y developing
assembly.
You may tilt the bottle slightly to avoid
leakage.
3 When done, press the Stop key to stop
the operation of the developing
assembly.
4 Repeat steps 1 through 3 for M, C, and
Bk. (Press 'SPLY-M', 'SPLY-C', or
'SPLY-K' as necessary to suit each
color.)
5 After supplying all developing
assemblies with starters, check to
make sure that 10 min or more has
passed since the end of toner supply
(to the hopper).
COPYRIGHT © 2001 CANON INC.
Work
.
<M> <S>
INSTALL
INIT-Y INIT-M
0
SINIT-Y SINIT-M
0
STIR-Y STIR-M
0
SPLY-Y SPLY-M
0
CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
The screw of the Y developing assembly starts to
rotate.
<R>
1/4
INIT-C INIT-3
0 0
SINIT-C SINIT-K
0 0
STIR-C STIR-K
0 0
SPLY-C SPLY-K
0 0
5. INSTALLATION
Remarks
<P> <F>
INIT-7
0 0
SINIT-4
0 0
STIR-4
0 0
SPLY-4
0 0
Funnel
Starter
5-15