Show Mls Qos Queue-Set - Cisco Catalyst 3030 Command Reference Manual

Chapter 2 Cisco Catalyst Blade Switch 3030 Cisco IOS Commands

show mls qos queue-set

Use the show mls qos queue-set user EXEC command to display quality of service (QoS) settings for
the egress queues.
Syntax Description
qset-id
| begin
| exclude
| include
expression
Command Modes User EXEC
Command History Release
12.2(25)SEE
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.nway
Examples This is an example of output from the show mls qos queue-set command:
Switch> show mls qos queue-set
Queueset: 1
Queue
----------------------------------------------
buffers
threshold1:
threshold2:
reserved
maximum
Queueset: 2
Queue
----------------------------------------------
buffers
threshold1:
threshold2:
reserved
maximum
78-17262-01
show mls qos queue-set [qset-id] [ | {begin | exclude | include} expression]
(Optional) ID of the queue-set. Each port belongs to a queue-set, which defines
all the characteristics of the four egress queues per port. The range is 1 to 2.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
: 1 2
: 25 25
100 200
100 200
: 50 50
: 400 400
: 1 2
: 25 25
100 200
100 200
: 50 50
: 400 400
3 4
25 25
100 100
100 100
50 50
400 400
3 4
25 25
100 100
100 100
50 50
400 400
Cisco Catalyst Blade Switch 3030 Command Reference
show mls qos queue-set
2-373