Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X Configuration Manual page 493

System basics configuration guide software for e series broadband services routers
Table of Contents

Advertisement

Table 49: Layer 2-Related Protocols (continued)
CLI Name
Description of Flow
atmInverseArp
ATM inverse ARP packets
dhcpExternal
DHCP external packets
ethernetArpMiss
Ethernet/Bridged Ethernet request to send ARP
ethernetArp
Ethernet/Bridged Ethernet reception of ARP packet
ethernetLacp
Ethernet LACP packet
ethernetDynamicIf
Ethernet/Bridged Ethernet dynamic VLAN interface creation
flisInPayload
Firewall/NAT payload
flisInPayloadUpdateTbl
Firewall/NAT payload and update table
frameRelayControl
Frame Relay LMI packets
frameRelayArp
Frame Relay inverse ARP packets
itmL2tpControl
IPSec transport mode L2TP control packets
mplsTtlOnRx
MPLS TTL expired on ingress
mplsTtlOnTx
MPLS TTL expired on egress
mplsMtu
MPLS MTU exceeded
pppEchoRequest
PPP echo request packets destined for the IC
pppEchoReply
PPP echo reply packets destined for the IC
pppEchoReplyFast
PPP echo request packets generating an FC-based reply
pppControl
other PPP control packets
pppoeControl
PPPoE PADx packets
Chapter 7: Passwords and Security
Denial of Service (DoS) Protection
463

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.1

Table of Contents