Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X Configuration Manual page 374

JUNOSe 11.1.x System Basics Configuration Guide
show processes cpu
344
Monitoring the System
hTftp 10.5.6.7
Static Host Table
-----------------
name ip address
----- -------------------------------------
george 1111:2222:3333:4444:5555:6666:7777:8888
dsw 10.10.121.42
deab 10.6.128.12
mFtp 10.10.121.11
mTftp 10.10.121.11
mary 10.10.121.11
sd 10.10.121.80
NFS Host Table
--------------
name userid groupid
---- ------ -------
deab 2001 100
See show hosts.
Use to display the CPU use.
Field descriptions
task name Name of the process
times invoked Number of times the process has been invoked
invocations per second Frequency of the process invocation
total running time (msec) Time the process has been running
percent running time Percentage of the total running time attributable to
this process
average time per invocation (usec) Average number of microseconds per
invocation of this process
5 second utilization (%) CPU use by the process for the last 5 seconds
1 minute utilization (%) CPU use by the process for the last minute
5 minute utilization (%) CPU use by the process for the last 5 minutes
Example
host1# show processes cpu
task name
---------------------
aaaAtm1483Config
aaaServer
tftp
Process Statistics
------------------
invocations running
times per
invoked second
------- ----------- --------
1 0
52 0
type
----
ftp
ftp
ftp
ftp
tftp
ftp
ftp
total
percent
time running
(msec) time
-------
0 0%
260 0%