Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X Configuration Manual page 235

Use to display the bulk statistics data collection configuration.
Field descriptions
AdminStatus Administrative status of the bulk statistics application
OperStatus Operational status of the bulk statistics application, enabled or
disabled
Interface Description Setting Method used to encode the ifDescr object:
common, proprietary, industry-common
File Format End of the line format in bulkstats files, carriage return and
line feed (CR+LF) or LF
Current Time Current system time used to compare with the collection
stop/start time
Intervals Number of times the bulk statistics collector has cycled through
a collection
PrimaryXfers Number of times the bulk statistics collector has attempted
a data file transfer to a primary server
PrimaryFails Number of primary server transfer failures
SecondaryXfers Number of times the bulk statistics collector has attempted
a data file transfer to a secondary server
SecondaryFails Number of secondary server transfer failures
BulkStats Collector Information:
Index Bulk statistics collector index number
CurrSize Current size of the bulk statistics file in bytes
MaxSize Maximum size configured for the bulk statistics file in bytes
Intrvl Time interval between bulk collections in seconds
Mode How often the collector is set up to collect statistics:
periodic Collects statistics periodically
single-interval Collects statistics once only
XferMode Collect mode configured for the collector:
auto Agent transfers file when interval expires
manual Network management system or the user initiates transfers
onFull Agent transfers file when it reaches the maximum size
State
inProg Collector is properly configured and currently active
notInSvc Collector has been decommissioned by a management
client
Chapter 4: Configuring SNMP
Collecting Bulk Statistics
205