Table of Contents
Advertisement
JUNOSe 11.1.x System Basics Configuration Guide
!
interface mlppp joe
!
ip route 0.0.0.0 0.0.0.0 10.13.5.1
ip route 40.0.0.0 255.0.0.0 atm5/0.104
ip route 172.28.32.70 255.255.255.255 10.13.5.1
no ip source-route
!
!
ipv6
!
! ============================================================================
virtual-router foo
...
interface null 0
interface loopback 0
!
interface atm 5/1.100.1
!
interface atm 5/1.102
!
interface atm 5/1.103
!
interface atm 5/1.103.1
!
interface atm 5/1.104
!
ip route 30.0.0.0 255.0.0.0 atm5/1.104
no ip source-route
!
!
ipv6
Format 2 output
Example 2
service show-config format 2
...
virtual-router default
...
interface atm 5/0
interface atm 5/0.100 point-to-point
!
interface atm 5/0.100.1
!
interface atm 5/0.102 multipoint
!
264
Monitoring the Current Configuration
ip address 127.0.0.2 255.0.0.0
ip address 102.0.1.2 255.255.255.0
ip address 102.0.2.2 255.255.255.0
ip address 100.0.0.2 255.255.255.0
ip address 100.0.1.2 255.255.255.0
ip address 150.0.1.2 255.255.255.0
ipv6 address 2000:0:17::2/60
atm pvc 100 0 100 aal5snap 0 0 0
encapsulation pppoe
pppoe sessions 1
encapsulation ppp
ppp authentication chap
atm pvc 1021 0 1021 aal5snap 0 0 0
atm pvc 1022 0 1022 aal5snap 0 0 0
atm pvc 1023 0 1023 aal5snap 0 0 0
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X and is the answer not in the manual?