Table of Contents
Advertisement
JUNOSe 11.1.x System Basics Configuration Guide
Timestamps of latest time sample from this peer:
Root reference
at:
Thu, Apr 13 2000 17:27:17.145 from 128.118.25.3
Broadcast was sent:
Thu, Apr 13 2000 17:42:02.118
Broadcast received:
Thu, Apr 13 2000 17:42:02.067
Sample buffer for this peer contains the following samples:
Delay
(sec):
0.000
Offset
(sec):
0.049
Dispersion(sec):
0.015
show ntp status
536
Monitoring NTP
0.000
0.000
0.000
0.000
0.050
0.050
0.050
0.050
0.015
0.014
0.013
0.012
See show ntp associations.
Use to view the configuration and status of the system.
Field descriptions
NTP Status State of NTP on the system and the stratum number of the
server
No. of associations Number of peer associations for the NTP server
Clock Status:
Offset Error Time difference between the system and the master, in
seconds
Frequency Error Error in the frequency of the system's clock, in seconds
per second
Last Update Last time received from the master
Root Dispersion Measure of all the errors associated with the network
hops and servers between the system and its stratum 1 server, in seconds
Configuration:
Admin. State Status of NTP on the router (enabled or disabled)
Virtual Router Name Name of the virtual router to which you attached
NTP
Broadcast Delay Time for a broadcast message to travel between the
server and the client, in microseconds
Client Mode NTP client status (True – system is an NTP client; False –
system is not an NTP client)
Master Mode NTP server status (True – system is configured as an NTP
server; False – system is not configured as an NTP server)
Stratum No. Stratum number of system if configured as NTP server
Summer Time Status of seasonal time, True or False
Summer Timezone Name Name of summer time zone
Timezone Name Name of time zone
0.000
0.000
0.000
0.050
0.051
0.051
0.011
0.010
0.009
Advertisement
Table of Contents
Troubleshooting
