Monitoring An Infranet Controller; Chapter 20 Monitoring An Infranet Controller; Realtime Monitor Overview; Viewing Device Status - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual

CHAPTER 20

Monitoring an Infranet Controller

Realtime Monitor Overview

Related
Documentation

Viewing Device Status

Copyright © 2010, Juniper Networks, Inc.
Realtime Monitor Overview on page 205
Viewing Device Status on page 205
Viewing Device Monitor Alarm Status on page 208
The Realtime Monitor module in NSM includes views that you can use to monitor real-time
status and statistics about all the managed security devices, VPN tunnels, NSRP clusters,
IDP sensors, and IDP clusters in your network. You can also use the Realtime Monitor to
identify problems, track security events, and discover trends across multiple geographic
regions and functional areas from a central management location.
The Realtime Monitor can also help you quickly identify potential device, network, and
system-level problems, such as:
Configuration status—At the device level, you can monitor the changing status of one
or more security devices in real time.
Connection status—At the network level, you can monitor problems that could lead
to failed devices.
The Realtime Monitor does the work of a management expert by first gathering
information about specific processes and network activity, and then color-coding each
event to organize problems.
Viewing Device Status on page 205
Viewing Device Monitor Alarm Status on page 208
Table 58 on page 206 lists and describes device information that you can view through
the Device Monitor.
205