Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X Configuration Manual page 220

JUNOSe 11.1.x System Basics Configuration Guide
show snmp management-event
190
Configuring the SNMP Server Event Manager
Use to view statistical SNMP event information for event table entries, router
resources, and trigger table entries.
Omit the events, resource, statistics, or triggers options to obtain a full output.
Field descriptions
Resource
SampleMinimum Minimum number of samples to be taken
SampleInstanceMaximum Maximum number of samples to be taken
SampleInstances Number of sample instances being monitored
SampleInstancesHigh Highest number of samples taken for any of the
sample instances
SampleInstancesLacks Number of times this system could not take a
new sample because that allocation would have exceeded the limit set
by mteResourceSampleInstanceMaximum
Triggers
Owner Owner value assigned to the trigger
Name Name value assigned to the trigger
Test Type of trigger test to perform
SampleType Type of sampling (absolute or delta) to perform
ValueID Object ID of the MIB sample for this trigger
ValueIDLimit Not supported in this release; reads as zero
ValueIDWildcard Not supported in this release; reads as False
ContextName Management context (for example, router1) from which
to obtain mteTriggerValueID
ContextNameRgulrExprssn Not supported in this release
ContextNameLimit Not supported in this release; reads as zero
ContextNameWildcard Not supported in this release; reads as False
Frequency Frequency at which this trigger is sampled
ObjectsOwner Not supported in this release
Objects Not supported in this release
Enabled State (False [disabled] or True [enabled]) of the trigger
EntryStatus Active/inactive status of the instance
Boolean