Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X Configuration Manual page 262

JUNOSe 11.1.x System Basics Configuration Guide
Table 30: Mapping Bulkstats Output to MIB Flies and CLI Configurations for QoS schema (continued)
Bulkstats Output
Column Name MIB File
QQueueProfile rsacctng
QSchedulerProfile rsacctng
QStatsProfile rsacctng
QShapMode rsacctng
QShapRate rsacctng
QLength rsacctng
QBurst rsacctng
232
Collecting Bulk Statistics
MIB Object Name CLI Configuration
rsAcctngQueueProfile queue-profile
rsAcctngSchedulerProfile scheduler-profile
rsAcctngStatisticsProfile statistics-profile
rsAcctngShapingMode shaping-mode
rsAcctngShapingRate shaping-rate
rsAcctngQueueLength queue-length
rsAcctngBurst burst
Description
The queue profile name
associated with the egress
queue. This attribute can be 32
characters long.
The attribute is a 32–bit
character string.
The scheduler profile name
associated with the egress
queue.
The attribute is a 32–bit
character string.
The statistics profile name
associated with the egress
queue.
The attribute is a 32–bit
character string.
The shaping mode associated
with the egress queue.
In the shape mode, is used to
control the downstream rate for
different media.
The shaping rate attribute of the
egress queue.
In the shape mode, when queue
is guaranteed a certain
percentage of bandwidth, the
queue cannot use more than the
allocated bandwidth even if the
link is idle. For egress queues,
the QShapRate attribute returns
the bit rate at which the traffic
for the queue is shaped.
The attribute is a 32–bit integer.
The length of the egress queue.
The attribute is a 32–bit integer.
The burst attribute of the egress
queue.
The attribute is a 16–bit integer.