Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X Configuration Manual page 241

show bulkstats receiver
Example
host1#show bulkstats interface-type
Interface Types:
Index Type
----- ----------------------
1 ppp
See show bulkstats interface-type.
Use to display information about the remote file configuration of the bulk statistics
receiver.
Field descriptions
Index Index number of the receiver
RemoteFileName Hostname, path, and filename of the remote FTP server
Index Index number of the receiver
State
active Receiver is properly configured and currently active
notInSvc Receiver has been decommissioned by a management client
notReady Receiver does not have enough configuration information
to go active
error Configuration/operational error
Status
Success
Copy source does not exist or is unreachable
Copy failed
File in use
Example
host1#show bulkstats receiver
Index RemoteFileName
----- ----------------------------------------------
1 f:/upload/bulkStas.sts
Index State Status
----- -------- ---------------------------------------------
1 notReady Copy source does not exist or is unreachable
See show bulkstats receiver.
Chapter 4: Configuring SNMP
Collector State
--------- --------
1 active
Collecting Bulk Statistics
211