Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X Configuration Manual page 263

Table 30: Mapping Bulkstats Output to MIB Flies and CLI Configurations for QoS schema (continued)
Bulkstats Output
Column Name MIB File
QWeight rsacctng
QAssuredRate rsacctng
QREDEnabled rsacctng
QSharShapType rsacctng
QSharShapRate rsacctng
QByteAdjType rsacctng
QByteAdjBytes rsacctng
QFwdedRate rsacctng
QAggDropRate rsacctng
QFwdedPkts rsacctng
MIB Object Name CLI Configuration
rsAcctngWeight weight
rsAcctngAssuredRate assured-rate
rsAcctngRedEnabled RED-enabled
rsAcctngSharedShapingMode shared-shaping-mode
rsAcctngSharedShapingRate shared-shaping-rate
rsAcctngByteAdjType byte-adjustment-type
rsAcctngByteAdjBytes byte-adjustment-bytes
rsAcctngForwardedRate forwarded-rate
rsAcctngAggDropRate aggregate-drop-rate
rsAcctngForwardedPackets forwarded-packets
Chapter 4: Configuring SNMP
Description
The weight attribute of the
queue. The weight of the queue
determines the bandwidth that
will be allocated to the queue
during congestion.
The attribute is a 16–bit integer.
The assured rate for the queue.
The attribute is a 32–bit integer.
Indicates if the Random Early
Detect (RED) is enabled for the
queue.
Indicates the type of
shared-shaping enabled on the
queue.
Indicates the rate of
shared-shaping enabled on the
queue.
The attribute is a 32–bit integer.
The type of byte adjustment
application configured on the
queue.
The number of bytes for the byte
adjustment application
configured on the queue.
The average forward rate of the
queue. It is averaged over the
rate period of the
statistics-profile associated with
the queue.
The attribute is a 64–bit integer.
The average drop rate of the
queue, including red, green and
yellow packets. It is calculated
over the rate period of the
queue's statistics profile.
The attribute is a 64–bit integer.
The number of packets that were
forwarded on the queue.
The attribute is a 64–bit integer.
Collecting Bulk Statistics
233