Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X Configuration Manual page 240

JUNOSe 11.1.x System Basics Configuration Guide
show bulkstats collector transfer-mode
show bulkstats interface-type
210
Collecting Bulk Statistics
See show bulkstats collector max-size.
Use to display information about the bulk statistics transfer mode configuration.
Field descriptions
Index Index number of the bulk statistics collector
Transfer-Mode:
auto-xfer Server automatically transfers the bulk statistics files to a
remote FTP server
manual-xfer Server expects the user to transfer bulk statistics files
on-file-full Server transfers the bulk statistics file when the file reaches
its maximum size
Primary-Receiver Receives the bulk statistics sent by the collector
Secondary-Receiver Serves as a backup to the primary receiver
Example
host1#show bulkstats collector transfer-mode
Index Transfer-Mode
----- -------------
1 auto-xfer
See show bulkstats collector transfer-mode.
Use to display information about the bulk statistics interface types configuration.
Field descriptions
Interface Types:
Index Index number of the interface type entry
Type Interface type for which bulk statistics collection is configured
CollectorIndex Index of the collector to which the interface type applies
State
active Interface type is properly configured and currently active
notInSvc Interface type has been decommissioned by a management
client
notReady Interface type does not have enough configuration
information to go active
error Configuration/operational error
Primary-Receiver Secondary-Receiver
---------------- ------------------
1 2