Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X Configuration Manual page 108

JUNOSe 11.1.x System Basics Configuration Guide
Table 10: Command Mode Overview (continued)
Mode Name Use of Mode
Map Class Configuration
Map List Configuration
Parent Group
Configuration
Policy List Configuration
Policy List Parent Group
Configuration
78
Accessing Command Modes
Access to Mode
Specify fragmentation
for a map class.
host1(config-map-class)#
Configure map list
parameters.
host1(config-map-list)#
Configure an external
parent group.
host1(config-parent-group)#
Configure policy lists.
host1(config-policy-list)#
Configure an internal
parent group in a
hierarchy.
host1(config-policy-l
ist-parent-group)#
Exit from Mode
From Global
Configuration mode,
specify the map-class
frame-relay command.
Prompt:
From Global
Configuration mode,
use the map-list
command.
Prompt:
From Global
Configuration mode,
use the parent-group
command.
Prompt:
To create a policy list,
from Global
Configuration mode use
the policy-list
command and identify
the type of policy list.
Prompt:
From Global
Configuration Mode,
use the policy-list
command to create or
access a policy list.
From Policy List
Configuration Mode,
use the parent-group
command.
Prompt:
Use the exit command once to
return to Global Configuration
mode.
Press Ctrl+z to return to Exec
mode.
Use the exit command once to
return to Global Configuration
mode.
Press Ctrl+z to return to Exec
mode.
Use the exit command once to
return to Global Configuration
mode.
Press Ctrl+z to return to Exec
mode.
Use the exit command once to
return to Global Configuration
mode.
Press Ctrl+z to return to Exec
mode.
Use the exit command twice to
return to Global Configuration
mode.
Press Ctrl+z to return to Exec
mode.