Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X Configuration Manual page 420

System basics configuration guide software for e series broadband services routers
Table of Contents

Advertisement

JUNOSe 11.1.x System Basics Configuration Guide
390
Managing Flash Cards on SRP Modules
Use to find and repair files with physical errors in NVS. These errors are created
if the router is not powered down or reset correctly.
If the router contains primary and redundant modules, only NVS on the primary
SRP module is scanned.
Use the repair keyword to fix nonfatal errors found on the disk. If the repair
fails, the router no longer uses the corrupted areas.
On the E120 and E320 routers only, you can use this command to find and repair
files on a second flash card installed as disk1. You can issue this command in
Boot mode for either flash card. In Privileged Exec mode, you can use the disk1
keyword to access the unmounted second flash card while the router is in an
operational state.
This command is available for disk1 in Privileged Exec mode only on SRP 320
modules. This command is not accepted for disk0 in Privileged Exec mode.
Example
In this example, the user scans NVS and finds one file with an error. The user
then issues the flash-disk scan with the repair keyword to remove the file.
Finally, the user scans NVS again, and finds no files with errors.
:boot##flash-disk scan
Proceed with Flash disk scan? [confirm]
Srp PCMCIA Card Scan...
Boot Block OK
File Allocation Table OK
Root Directory OK
Checking File Space
Please Wait...
Checking Free Space
Please Wait...
PCMCIA Card Scan Detected Errors in:
\\images\ct1Diag\ct1Diag3c440e9e.cmp
PCMCIA Card Scan successful!
:boot##flash-disk scan repair
WARNING: Execution of this command may cause the contents of the Flash
disk to be modified.
Proceed with Flash disk scan? [confirm]
Srp PCMCIA Card Scan...
Boot Block OK
File Allocation Table OK
Root Directory OK
Checking File Space
Please Wait...
Checking Free Space
Please Wait...
PCMCIA Card Scan Removed:
\\images\ct1Diag\ct1Diag3c440e9e.cmp
PCMCIA Card Scan successful!
:boot##flash-disk scan
Proceed with Flash disk scan? [confirm]
Srp PCMCIA Card Scan...
Boot Block OK
File Allocation Table OK

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.1

Table of Contents