Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X Configuration Manual page 244

JUNOSe 11.1.x System Basics Configuration Guide
show bulkstats traps
show bulkstats virtual-routers
214
Collecting Bulk Statistics
1 MON JAN 24 2001 19:09:33 UTC MON JAN 24 2001 19:15:33 UTC
2 Not started
Dynamic Interface Collector statistics:
CollectorIndex Slot#
-------------- -----
1 1
See show bulkstats statistics.
Use to display information about the bulk statistics traps configured to collect
statistics.
Field descriptions
Trap Type
nearly-full Trap will be posted to the SNMP entity on this system when
the threshold is reached
file-full Trap will be posted to the SNMP entity on this system when
the trap reaches 100%
State Configuration setting: enabled, disabled
Threshold Nearly full trap will be posted to the SNMP entity on this system
when this percentage is reached
Traps Sent Number of times this event was posted to the SNMP entity on
this system
Example
host1#show bulkstats traps
Trap Type State
----------- -------
file-full enabled
nearly-full enabled
See show bulkstats traps.
Use to display information about the bulk virtual router group configuration.
Field descriptions
Collector Number that identifies the particular data collector, in the range
1–65535
Virtual-Routers Set of virtual router names (up to 64 names)
Example
host1#show bulkstats virtual-routers
N/A
Received Transferred
---------- -----------
0 0
Threshold Traps Sent
---------- ----------
N/A 0
5 0
Dropped
----------
0