Viewing Device Status - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01 Manual

Configuring Intrusion Detection and Prevention Devices Guide
Table 59: NSM Audit Log Viewer: Device View Table
Column Description
Device Name To see additional details for an device view entry, double-click the entry. NSM displays the Job Manager
information window for the job task.
Table To set the table details for the device view entry, double-click the table. Enter or update the options.
Domain ID Specifies the domain ID of the device view.
Related
Documentation

Viewing Device Status

132
Viewing Device Status on page 132
NSM Logs and Reports Overview on page 129
Configuring Syslog Collection (NSM Procedure) on page 82
NSM keeps you up-to-date on the health of your network with the following information:
View critical information about your devices and IDP sensors in the Device Monitor:
Configuration and connection status of your security devices
Individual device details, such as memory usage and active sessions
Device statistics
View the status of your IDP clusters in the IDP Cluster Monitor.
Table 60 on page 132 lists and describes device information that you can view through
the Device Monitor.
Table 60: Device Status Information
Column Description
Name Unique name assigned to the device in NSM.
Domain Domain in NSM in which the device is managed.
Platform Model number of the device.
OS Version Operating system firmware version running on the device.
Copyright © 2010, Juniper Networks, Inc.