Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X Configuration Manual page 84

System basics configuration guide software for e series broadband services routers
Table of Contents

Advertisement

JUNOSe 11.1.x System Basics Configuration Guide
Example 3
In Example 3:
Example 4
In Example 4:
Example 5
In Example 5:
Example 6
In Example 6, a number or name can specify the seven privilege groups 0, 5, 6, 7,
10, 13, and 15.
54
CLI Command Privileges
Privilege group 15 contains two groups: 14 and 10. The privilege groups 0, 1, 2,
4, 5, 6, 7, 8, 9, 10, and 14 are reachable from privilege group 15.
A user at privilege 15 does not have access to commands in privilege groups 11,
12, or 13.
host1(config)#privilege-group membership clear 13
host1(config)#privilege-group membership 13 add 10
Commands are executed in the following sequence: 15 contains 14, 14 contains
13, 13 contains 12, and so forth,
Privilege group 13 contains one privilege group: privilege group 10.
The privilege groups 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, and 10 are reachable from privilege
group 13.
host1(config)#privilege-group membership 12 remove 11
host1(config)#privilege-group membership 12 add 5
host1(config)#privilege-group membership 11 add 5
Commands are executed in the following sequence: 15 contains 14, 14 contains
13, 13 contains 12, and so forth.
Privilege group 12 contains one privilege group: the privilege group 5.
Privilege group 11 contains one privilege group: the privilege group 5.
Privilege groups 0, 1, 2, 3, 4, 5 are reachable from privilege groups 12 and 11.
host1(config)#privilege-group membership clear 9 8 7
host1(config)#privilege-group membership 7 add 1
host1(config)#privilege-group membership 8 add 14
Privilege group 9 contains no privilege groups.
Privilege group 8 contains group 14.
Privilege group 7 contains group 1.
host1(config)#privilege-group alias 13 LI
host1(config)#privilege-group alias 10 dailyAdmin
host1(config)#privilege-group alias 7 weekendAdmin
host1(config)#privilege-group alias 6 dailyTroll
host1(config)#privilege-group alias 5 basicUser
host1(config)#privilege-group alias 0 minUser
host1(config)#privilege-group alias 15 superUser

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Junose 11.1

Table of Contents