Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X Configuration Manual page 621

Table 58: E Series Hardware Standards (continued)
Reference
EN55022 Class A (CISPR-22 Class A)
EN55024, Annex C for WAN Equipment Performance Criteria A, B, and C
EN60825-1, Safety of Laser Products - Part 1: Equipment Class,
Requirements, and User's Guide (2001)
EN60950:2000, 3rd Edition, Safety of Information Technology Equipment
ETSI 300-386, Telecommunication Network Equipment; ElectroMagnetic
Compatibility (EMC) requirements
FCC Part 15 Class A
FCC PART 68
GR-63 (LSSGR, FD-15): Network Equipment Building System (NEBS)
Requirements: Physical Protection, Issue 1, October 1995
GR-1089 (LSSGR, FD-15): Electromagnetic Compatibility and Electrical
Safety - Generic Criteria for Network Telecommunications Equipment,
Issue 2, Revision 1, February 1999
IEC 825-1, Safety of Laser Products - Part 1
IEC 60950-1(2001-10) Ed. 1.0 Information technology equipment - Safety
- Part 1: General requirements
IECS-003 Issue 3 Class A
ITUT G.703, Physical/electrical characteristics of hierarchical digital
interfaces (November 2001)
Low Voltage Directive (73/23/EEC)
PD7024 Essential requirements for terminal equipment intended for
connection to unstructured digital leased circuits of the public
telecommunications network using a CCITT recommendation G,703
interface at a rate of 2048 kbit/s with a 75 ohm unbalanced presentation,
1994
RTTE Directive (1999/5/EEC)
SR-3580 (FD-15): Network Equipment Building System (NEBS) Criteria
Levels, Issue 1, November 1995
UL 60950, 3rd Edition, Safety of Information Technology Equipment
VCCI (Voluntary Control Council for Interference by Information Technology
Equipment)
Appendix B: References
Protocol or
Feature
EMC
EMC
Safety
Safety
EMC
EMC
EMC
NEBS
NEBS
Safety
Safety
EMC
Cables
Safety
Telecom
Telecom
Safety
Safety
EMC
591
Hardware Standards