Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X Configuration Manual page 368

JUNOSe 11.1.x System Basics Configuration Guide
338
Monitoring the System
Field descriptions
chassis Number of slots, midplane identifier, and hardware revision number
14Slot 5 Gbps, 14 slot midplane
midplaneId7Slot 5 Gbps, 7 slot midplane
midplaneIdRx1400 10 Gbps ASIC compatible, 12 line module slots, 2
SRP module slots for ERX14xx models
midplaneIdRx700 10 Gbps ASIC compatible, 5 line module slots, 2
SRP module slots for ERX7xx models
17 slot 100 or 320 Gbps, 17-slot midplane for the E120 router
11 slot 320 Gbps, 11-slot midplane for the E120 router
fabric Capacity and hardware revision of the fabric
fans Status of fans
nvs Status and capacity of NVS and amount of space used
power States of power feeds
AC power For ERX310 router only; states of power feeds
srp redundancy Availability of a redundant SRP module
slots: cards missing or offline Status of each slot
online
standby
offline
empty
line redundancy Number of redundancy groups installed
width Number of slots the redundant midplane covers
spare Slot that contains a spare line module
primary Slot that contains the primary line module
fabric redundancy Status of redundancy on the switch fabric on the E120
and E320 routers
ok
none
temperature Status of the system temperature
timing Source of the timing signal
primary Type and status of the primary timing signal
secondary Type and status of the secondary timing signal