Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X Configuration Manual page 243

Index Bulk statistics collector index
CurrSize Current size of the bulk statistics storage file in bytes
CreateErrs Number of bulk statistics collector create errors
Last Transfer Failure Last time that the collector attempted to retrieve
statistics and was unsuccessful
Interval Start Time Start of current interval or bulk collections. The
collector began collecting bulk statistics at this time.
Interval Stop Time End of current interval of bulk collections
Dynamic Interface Collector statistics:
Collector Index Bulk statistics collector index
Slot# Slot number from which the statistics were obtained
Received Number of records for dynamic interfaces that were reported
by the specified interface
Transferred Number of record for dynamic interface that were written
to the bulk statistics (.sts) file.
Dropped Number of records for dynamic interfaces that were dropped
(that is, not written to the bulk statistics [.sts] file)
Example
host1#show bulkstats statistics
AdminStatus:
OperStatus:
HdwDetects:
HdwCollectorCreates:
CollectorCreateReqs:
CollectorStopReqs:
CollectorDeleteReqs:
CollectorStarts:
CollectorIncompleteCfgs:
CollectorStopFailures:
DriverErrors:
FileSizeFulls:
CollectorFileNearlyFullTraps: 0
CollectorFileFullTraps:
Intervals PrimaryXfers PrimaryFails SecondaryXfers
--------- ------------ ------------ --------------
24 18
BulkStats Collector Statistics:
Index CurrSize CreateErrs
----- -------- ----------
1 331 0
2 0 0
Index Interval Start Time
----- ---------------------------- -------------------------
Chapter 4: Configuring SNMP
enabled
enabled
4
8
2
0
0
25
3
0
0
0
0
5 0
Last Transfer Failure
----------------------------
MON JAN 24 2001 17:21:33 UTC
Interval Stop Time
Collecting Bulk Statistics
SecondaryFails
--------------
0
213