The - -More- - Prompt - Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X Configuration Manual

The - -More- - Prompt

When command output continues beyond the available space on your monitor screen,
the system displays the --More-- prompt. If you press Enter, the system displays the
next line of output. If you press the Spacebar, the system displays the next screen
of output.
You can begin filtering the output from the --More-- prompt, or change a filter that
is already in effect, by entering one of the following characters and a text string:
+ (plus)
– (minus)
/ (forward slash)
Initial spaces are not ignored when you filter at the --More-- prompt.
In the following example, the output is displayed until the screen is filled and the
Example 1
--More-- prompt appears. By entering the filter /interf, the user forces the system to
filter out all output lines until the first occurrence of the string interf. The system
displays that line and all following lines of the output.
host1#show config include-defaults
! Configuration script being generated on FRI AUG 04 2006 12:48:48 UTC
! Juniper Edge Routing Switch ERX-700
! Version: 7.3.0 beta-1.6 [BuildId 5672] (July 11, 2006
! Copyright (c) 1999-2006 Juniper Networks, Inc.
!
boot config running-configuration
boot system erx_7-3-0.rel
no boot backup
no boot subsystem
no boot backup subsystem
boot revert-tolerance 3 1800
no boot force-backup
!
aaa domain-map jacksonville
virtual-router miami
strip-domain disable
!
aaa domain-map jak
virtual-router default
strip-domain disable
!
aaa domain-map northeast
virtual-router default
/interf
(Suppressing output until 'interf' is found, press ^C to end...)
interface null 0
interface ip 0/0
Displays all output lines that contain the text string
Displays all output lines that do not contain the text
string
Displays all output lines starting at the first line that
contains the text string
All rights reserved.
Chapter 2: Command-Line Interface
11:58)
Overview
43