Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X Configuration Manual page 258

JUNOSe 11.1.x System Basics Configuration Guide
Table 29: Mapping Bulkstats Output to MIB Flies and CLI Configurations for Policy Schema (continued)
Bulkstats Output
Column Name MIB File
ifOutErrors RFC1213
ifCorrelato juniAcctng
ifInPolicedOctets juniAcctng
ifInPolicedPkt juniAcctng
ifInSpoofedPkts juniAcctng
ifOutPolicedOctets juniAcctng
ifOutPolicedPkts juniAcctng
ifOutSchedOctets juniAcctng
ifOutSchedPkts juniAcctng
ifLowerInterface juniAcctng
ifTimeOffse juniAcctng
228
Collecting Bulk Statistics
MIB Object Name CLI Configuration
ifOutErrors out-errors
juniAcctngIfCorrelator correlator
juniAcctngIfInPolicedOctets in-policied-octets
juniAcctngIfInPolicedPkts in-policied-octets
juniAcctngIfInSpoofedPkts in-spoofed-pkts
juniAcctngIfOutPolicedOctets out-policied-octets
juniAcctngIfOutPolicedPkts out-policied-pkts
juniIpIfStatsOutSchedDropOctets out-sched-octets
juniIpIfStatsOutSchedDropPackets out-sched-pkts
juniAcctngIfLowerInterface lower-interface
juniAcctngIfTimeOffset time-offset
Description
For packet-oriented
interfaces, the number of
outbound packets that
could not be transmitted
because of errors. For
character-oriented or
fixed-length interfaces, the
number of outbound
transmission units that
could not be transmitted
because of errors
Discontinuities in the value
of this counter can occur at
re-initialization of the
management system, and
at other times as indicated
by the value of
ifCounterDiscontinuityTime
Customer correlation:
FR = DLCI
ATM = VPI, VCI
IP = RouterName
Everything else = not
used
Octets dropped due to
ingress policy; support
64-bit counters
Packets dropped due to
ingress policy
Packets dropped due to
invalid source address
Octets dropped due to
egress policy; support 64-bit
counters
Packets dropped due to
ingress policy
Scheduler octets dropped
Scheduler packets dropped
The ifIndex of the lower
interface
-