Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X Configuration Manual page 573

host1:western:eastern(config)#
View the VRF configuration choices from VRF Configuration mode.
host1:western(config-vrf)#?
host1:western(config-vrf)#
Access a VR to configure it with an interior gateway protocol (IGP) or exterior
gateway protocol (EGP) to learn routes from a customer edge (CE) device. See
the related routing protocol chapters for detailed information.
host1(config)#virtual-router miami
Example 1
host1:miami(config)#router ospf 5
VR with an IGP
host1:miami(config-router)#
Example 2 host1(config)#virtual-router western
host1:western(config)#router bgp 359
VR with an EGP
host1:western(config-router)#
Configure a Telnet daemon to listen in VRs other than the default VR.
host1(config)#virtual-router boston
host1:boston(config)#telnet listen port 23
List all VRs and VRFs on the router.
host1#show virtual-router
Virtual Router : default
Virtual Router : thursday
Virtual Router : western
Virtual Router : boston
Virtual Router : miami
Virtual Router : northern
set
sleep
slot
snmp-server
sscc
telnet
timing
traffic-shape-profile
virtual-router
exit Exit from the current command mode
export Specify VRF export characteristics
help Describe the interactive help system
import Specify VRF import characteristics
log Configure logging settings
macro Run a CLI macro
no Negate a command or set its default(s)
rd Specify route distinguisher
route-target Specify VPN extended community Target
sleep Make the Command Interface pause for a
specified duration
VRF : eastern
Chapter 11: Configuring Virtual Routers
Configure
Make the Command Interface pause for a
specified duration
Configure and administer slot operation
Configure SNMP parameters
The SSC Client
telnet daemon configuration
Configure network timing
Enter traffic shape profile configuration mode
Specify a virtual router
Configuring Virtual Routers
543