Viewing Logs In Secure Access Devices; Chapter 24 Viewing Logs In Secure Access Devices; Viewing Device Status - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SECURE ACCESS DEVICES GUIDE REV 01 Manual
Configuring secure access devices guide
Hide thumbs
Also See for NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SECURE ACCESS DEVICES GUIDE REV 01:
- Manual (444 pages) ,
- Administration manual (1026 pages) ,
- Installation manual (244 pages)
Table of Contents
Advertisement
CHAPTER 24
Viewing Logs in Secure Access Devices
Viewing Device Status
Copyright © 2010, Juniper Networks, Inc.
Viewing Device Status on page 313
Viewing Device Monitor Alarm Status on page 316
Monitoring the Secure Access as an SNMP Agent (NSM Procedure) on page 317
Table 94 on page 313 lists and describes device information that you can view through
the Device Monitor.
Table 94: Device Status Information
Column
Description
Name
Unique name assigned to the device in NSM.
Domain
Domain in NSM in which the device is managed.
Platform
Model number of the device.
OS Version
Operating system firmware version running on the device.
313
Advertisement
Chapters
Table of Contents
