Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X Configuration Manual page 113

Table 10: Command Mode Overview (continued)
Mode Name Use of Mode
Service Session Profile
Configuration
SNMP Event Manager
Configuration
Statistics Profile
Configuration
Subinterface
Configuration
Access to Mode
Configure attributes for
Service Manager
service session profiles.
host1(config-service-session-
profile)#
Configure SNMP
events.
host1(config-mgmtevent)#
Configure statistics
profiles.
host1(config-statistics-
profile)#
Configure multiple
virtual interfaces on a
single physical
interface.
host1(config-subif)#
Chapter 2: Command-Line Interface
Exit from Mode
From Global
Configuration mode,
use the
service-management
service-session-profile
command.
Prompt:
From Global
Configuration mode,
use the snmp-server
management-event
command.
Prompt:
From Global
Configuration mode,
use the
statistics-profile
command.
Prompt:
From Global
Configuration mode,
use the interface
command and identify
the interface
(slot/port.subinterface).
Prompt:
Accessing Command Modes
Use the exit command twice to
return to Global Configuration
mode.
Press Ctrl+z to return to Exec
mode.
Use the exit command once to
return to Global Configuration
mode.
Press Ctrl+z to return to Exec
menu.
Use the exit command once to
return to Global Configuration
mode.
Press Ctrl+z to return to Exec
menu.
Use the exit command once to
return to Global Configuration
mode.
Press Ctrl+z to return to Exec
mode.
83