Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X Configuration Manual page 256

JUNOSe 11.1.x System Basics Configuration Guide
Table 29: Mapping Bulkstats Output to MIB Flies and CLI Configurations for Policy Schema (continued)
Bulkstats Output
Column Name MIB File
ifInErrors RFC1213
ifInUnknownProtos RFC1213
226
Collecting Bulk Statistics
MIB Object Name CLI Configuration
ifInErrors in-errors
ifInUnknownProtos in-unknown-protos
Description
For packet-oriented
interfaces, the number of
inbound packets that
contained errors preventing
them from being
deliverable to a higher-layer
protocol. For character-
oriented or fixed-length
interfaces, the number of
inbound transmission units
that contained errors
preventing them from
being deliverable to a
higher-layer protocol
Discontinuities in the value
of this counter can occur at
re-initialization of the
management system, and
at other times as indicated
by the value of
ifCounterDiscontinuityTime
For packet-oriented
interfaces, the number of
packets received via the
interface which were
discarded because of an
unknown or unsupported
protocol. For
character-oriented or
fixed-length interfaces that
support protocol
multiplexing the number of
transmission units received
via the interface which
were discarded because of
an unknown or
unsupported protocol. For
any interface that does not
support protocol
multiplexing, this counter
will always be 0
Discontinuities in the value
of this counter can occur at
re-initialization of the
management system, and
at other times as indicated
by the value of
ifCounterDiscontinuityTime