Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X Configuration Manual page 194

System basics configuration guide software for e series broadband services routers
Table of Contents

Advertisement

JUNOSe 11.1.x System Basics Configuration Guide
To compress interfaces according to type, use the snmp-server interfaces compress
command. To see the list of interfaces that you can remove, use the CLI help:
If you enter the snmp-server interfaces compress command without keywords, the
following interface types are removed from the interface tables:
snmp-server interfaces compress
164
SNMP Configuration Tasks
host1(config)#snmp-server interfaces compress ?
Atm Atm interface layer
Atm1483 Atm1483 interface layer
AtmAal5 AtmAal5 interface layer
. . .
SonetVT SonetVT interface layer
VlanMajor VlanMajor interface layer
VlanSub VlanSub interface layer <cr>
ip
ppp
ethernetSubinterface
hdlc
ipLoopback
ipVirtual
pppLinkInterface
pppoeInterface
slepInterface/ciscoHdlc
Use to remove interface sublayers either from all interface tables or from specific
table types, such as interface tables and interface stack tables, in the SNMP
interface configuration. If you use the snmp-server interfaces compress
command on an interface without specifying a table type, it compresses the
interface in all the tables. If you compress an interface using the table-type
keyword for the first time, subsequent uses of the snmp-server interfaces
compress command without the table-type keyword compress the interface
only in the ipNetToMediaTable (not in interface tables or interface stack tables).
Example 1 To compress all interfaces on an interface layer, PPP, use the
following command:
host1(config)#snmp-server interfaces compress ppp
Example 2 If you use the snmp-server interfaces compress command with
the table-type keyword to compress an interface, issuing the same command
the next time without specifying a table type compresses the interface only in
the ipNetToMediaTable. In the following example, the command is used with
the table-type keyword for the first time on a router to compress the Ds1
interface in interface stack tables:
host1(config)#snmp-server interfaces compress Ds1 table-type
interface-stack-tables

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.1

Table of Contents