Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X Configuration Manual page 577

show ip forwarding-table slot
show virtual-router
timeout 10000
!
See show configuration.
Use to display the memory used by each VR configured on a line module and
free memory available on the line module.
Field descriptions
Free Memory Amount of memory free on the line module, in kilobytes
Virtual Router Name of the virtual routers configured on the line module
Memory (KB) Amount of memory consumed by the VR, in kilobytes
Load Errors Counts errors made while loading the routing table on the line
module
Status Indicates whether the routing table for the VR is valid
Example
host1#show ip forwarding-table slot 9
Free Memory = 14,328KB
Virtual Router
----------------
vr1
vr2
vr3
vr4
default
-----------------------------------------------------------
See show ip forwarding-table slot.
Use to display the virtual routers and VRFs configured on your router.
Use the summary keyword to display only the total number of virtual routers
and the total number of VRF instances.
Use the detail keyword to display the status of the routing protocols configured
for each virtual router.
Use the summary keyword with the detail keyword to display the number of
VRF instances for each virtual router.
Use the output filtering feature of the show command to include or exclude lines
of output based on a text string you specify. See "Command-Line Interface" on
page 29, for details.
Example 1
Chapter 11: Configuring Virtual Routers
Memory Load Errors
(KB)
--------- -------------
4128 0
3136 0
2256 0
1512 0
1024 0
Monitoring Virtual Routers
Status
--------
Valid
Valid
Valid
Valid
Valid
547