Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X Configuration Manual page 459

show line vty
Example 2 (secret)
host1(config-line)#password 5 bcA";+1aeJD8)/[1ZDP6
Example 3 (encrypted password)
host1(config-line)#password 7 dq]XG`,%N"SS7d}o)_?Y
Use the no version to remove the password. By default, no password is specified.
See password.
Use to display the configuration of a vty line.
Field descriptions
access-class Access-class associated with the vty line
data-character-bits Number of bits per character
7 Setting for the standard ASCII set
8 Setting for the international character set
exec-timeout Time interval that the terminal waits for expected user input
Never Indicates that there is no time limit
exec-banner Status for the exec banner: enabled or disabled. This banner
is displayed by the CLI after user authentication (if any) and before the first
prompt of a CLI session.
motd-banner Status for the message of the day (MOTD) banner: enabled
or disabled. This banner is displayed by the CLI when a connection is
initiated.
login-timeout Time interval during which the user must log in.
Never Indicates that there is no time limit
Example
host1#show line vty 0
no access-class in
data-character-bits 8
exec-timeout 3w 3d 7h 20m 0s
exec-banner enabled
motd-banner enabled
login-timeout 30 seconds
See show line vty.
Chapter 7: Passwords and Security
Vty Line Authentication and Authorization
429