Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X Configuration Manual page 429

name Filename of the hotfix
id Number uniquely identifying the hotfix; nonconfigurable so that you can
identify the hotfix if the filename has been changed
active Status of hotfix activation; X indicates that the hotfix is active
armed Status of hotfix arming; X indicates that the hotfix is armed to be
activated; only hotfixes armed for the currently armed release are displayed
as armed
requires Hotfix ID number or numbers identifying hotfix dependencies,
which are hotfixes that must be activated before this hotfix can be activated
synopsis Brief description of the functionality or behavior of the hotfix
Description More detailed description of the functionality or behavior of
the hotfix
Dependencies Hotfix ID number or numbers identifying hotfix
dependencies, which are hotfixes that must be activated before this hotfix
can be activated
Safe to repatch Hotfix ID number or numbers of hotfixes that can be
concurrently active with this hotfix; applies only to hotfixes that fix the same
existing functionality
Unsafe with Hotfix ID number or numbers of hotfixes that are incompatible
and cannot be activated at the same time as this hotfix
Notes Restrictions on manual activations or deactivations
Example 1
host1#show hotfix
name id
---------------- ----
sleep.hfx 975
clock.hfx 990
showHotfix.hfx 2010
incompatible.hfx 410
hfActivate.hfx 960
Example 2 The detail keyword additionally displays a synopsis of the hotfix.
host1#show hotfix detail
name id
---------------- ----
sleep.hfx 975
clock.hfx 990
showHotfix.hfx 2010
incompatible.hfx 410
hfActivate.hfx 960
name
---------------- ------------------------------------------------
sleep.hfx Modify the output of the sleep command.
Chapter 6: Managing Modules
active armed requires
------ ----- ----------
X X 990
X X
active armed requires
------ ----- ----------
X X 990
X X
synopsis
Updating the Router with JUNOSe Hotfix Files
399