Group - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

group

To specify a group scheduler node for QoS:
Syntax
[ no ] typeOfInterface group groupName scheduler-profile schedulerProfileName
To specify a Diffie-Hellman group:
group { 1 | 2 | 5 }
no group
Command introduced before JUNOSe Release 7.1.0.
Release Information
From QoS Profile Configuration mode, specifies that a group scheduler node be
Description
configured for each interface of the given interface type. The no version removes
this rule from the QoS profile.
From IKE Policy Configuration mode, assigns a Diffie-Hellman group to the IKE policy.
The no version restores the default, 1024-bit Diffie-Hellman group.
Options
IKE Policy Configuration, QoS Profile Configuration
Mode
Related Topics
typeOfInterface Interface types for group scheduler nodes to be configured:
atm, ethernet, serial, server-port
groupName Name of the traffic class group
schedulerProfileName—Name of the scheduler profile
1 Specifies the 768-bit group
2 Specifies the 1024-bit group
5 Specifies the 1536-bit group
Configuring a QoS Profile
Configuring Shadow Nodes
Configuring QoS for an L2TP Session
Configuring QoS for Tunnel-Server Ports for L2TP LNS Sessions
Chapter 8: G Commands
659
group