Index - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

JUNOSe 11.0.x Command Reference Guide A to M

index

index indexNumber next-address ipAddress [ [ mask ] ipMask ] [ loose ]
Syntax
no index indexNumber
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets a next hop at a particular index in the MPLS explicit path. The no version removes
Description
the next hop from the index.
Options
Explicit Path Configuration
Mode
698
index
indexNumber Number of a node in an ordered set of abstract nodes; in the
range 1–255
ipAddress Address of the next hop
ipMask [ not currently used] mask for the next adjacent address
loose Node is not necessarily directly connected (adjacent) to the previous node
in the path. If loose is not configured, the configuration defaults to strict. Strict
indicates that the node is directly connected to the previous node.