Baseline Ipv6 Tcp - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

JUNOSe 11.0.x Command Reference Guide A to M

baseline ipv6 tcp

baseline ipv6 tcp [ vrf vrfName ] [ localAddress localPort remoteAddress remotePort ]
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
ip keyword removed and ipv6 keyword added in JUNOSe Release 7.2.0.
Sets a statistics baseline for only IPv6 TCP statistics. The router implements the
Description
baseline by reading and storing the statistics at the time the baseline is set and then
subtracting this baseline whenever baseline-relative statistics are retrieved. There is
no no version.
Options
Privileged Exec
Mode
252
baseline ipv6 tcp
vrfName—Name of the VRF; string of 1–32 alphanumeric characters
localAddress—Local IPv6 address on the router
localPort—Local TCP port number on the router
remoteAddress—IPv6 address of remote router
remotePort TCP port number on remote router