Ip Igmp Group Limit - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

JUNOSe 11.0.x Command Reference Guide A to M

ip igmp group limit

ip igmp group limit groupLimit
Syntax
no ip igmp group limit
Command introduced before JUNOSe Release 7.1.0.
Release Information
Limits the number of IGMP groups that an interface can accept. The no version
Description
restores the default situation, in which there is no limit to the number of IGMP groups
that the interface accepts.
Options
Interface Configuration, Profile Configuration
Mode
804
ip igmp group limit
groupLimit Maximum number of IGMP groups that an interface can accept in
the range 0–64,000